Pike Pond Reservoir Report

Last Updated: December 5, 2025

Pike Pond, located in Pike, Alabama, is a privately owned water resource that serves multiple purposes including fire protection, stock, and small fish pond, as well as recreation.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1960, this earth dam structure stands at a hydraulic height of 23 feet and a structural height of 24 feet, with a length of 548 feet. The pond has a storage capacity of 96 acre-feet, with a normal storage level of 84 acre-feet.

Although Pike Pond has a low hazard potential and is currently rated as "Not Rated" in terms of condition assessment, it has not undergone recent inspections or assessments. The dam structure does not have designated spillways or outlet gates, and there are no associated locks. The water resource falls under the jurisdiction of the Mobile District of the US Army Corps of Engineers, in Congressional District 02 of Alabama, represented by Martha Roby (R). While the pond is not currently regulated by the state and lacks certain safety protocols such as an Emergency Action Plan (EAP), it remains a valuable asset for the local community and wildlife in the area.

Year Completed

1960

Dam Length

548

River Or Stream

TR-BEAVER POND BRANCH

Primary Dam Type

Earth

Hydraulic Height

23

Nid Storage

96

Structural Height

24

Hazard Potential

Low

Nid Height

24
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.