Gilbert Lake Dam Reservoir Report

Last Updated: December 5, 2025

Gilbert Lake Dam, located in the Sawyer Cove Community of Chilton, Alabama, is a private dam primarily used for recreation.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1968, this earth dam stands at a hydraulic height of 21 feet and a structural height of 25 feet, with a length of 200 feet. It has a storage capacity of 69 acre-feet and a maximum discharge of 1080 cubic feet per second. Despite its small size, the dam is classified as having a high hazard potential.

With its picturesque setting along TR-Watson Creek, Gilbert Lake Dam provides a serene environment for fishing, boating, and other recreational activities. While it is not regulated or inspected by the state, the dam serves as a vital resource for the local community. Despite its condition assessment not being rated, the dam continues to fulfill its purpose of providing a recreational outlet for residents and visitors alike.

Year Completed

1968

Dam Length

200

River Or Stream

TR-WATSON CREEK

Primary Dam Type

Earth

Hydraulic Height

21

Nid Storage

69

Structural Height

25

Hazard Potential

High

Nid Height

25
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.