Baneberry Lake Reservoir Report

Last Updated: December 5, 2025

Baneberry Lake is a private recreational water resource located in Hoover, Alabama.


°F

°F

mph

Wind

%

Humidity

Summary

It is a man-made lake with a storage capacity of 110 acre-feet and a surface area of 12 acres. The dam that creates the lake is 16 feet high and 180 feet long, with a hazard potential rated as high. Despite its recreational primary purpose, the dam is not currently rated for its condition and has not been inspected in recent years.

Situated on Dodd Branch, Baneberry Lake offers a tranquil retreat for water and climate enthusiasts in Shelby County, Alabama. While the lake provides opportunities for recreation, such as fishing and boating, it also poses a potential hazard due to its high hazard potential rating. The dam's condition assessment remains unrated, and important safety measures, such as Emergency Action Plans, have not been documented or updated.

With its scenic location and potential risks, Baneberry Lake presents an intriguing study for water resource and climate enthusiasts. As a privately owned lake in the Mobile District of the US Army Corps of Engineers, it serves as a reminder of the importance of balancing recreation with the management of water resources. Further research and evaluation are needed to ensure the safety and sustainability of this picturesque waterway in Alabama.

Dam Length

180

Dam Height

16

River Or Stream

DODD BRANCH

Surface Area

12

Nid Storage

110

Hazard Potential

High

Nid Height

16
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.