White River L And D No. 1 Reservoir Report

Last Updated: December 5, 2025

White River L and D No.


°F

°F

mph

Wind

%

Humidity

Summary

1, located in Batesville, Arkansas, is a timber crib dam completed in 1904 by the Corps of Engineers. This hydroelectric structure serves multiple purposes, including hydroelectric power generation, recreation, and water supply. With a dam height of 28 feet and a length of 660 feet, the White River L and D No. 1 has a storage capacity of 12,500 acre-feet and sits on a drainage area of 11,072 square miles.

Managed by the Federal Energy Regulatory Commission, this dam has a spillway width of 660 feet and a maximum discharge of 62,613.1 cubic feet per second. The hazard potential is considered significant, with a moderate risk assessment rating. Despite its age, the condition assessment of White River L and D No. 1 is listed as "Not Available," and the last inspection was conducted in September 2020. Overall, this dam plays a crucial role in water resource management in the region and is an important asset for both energy production and recreational activities along the White River.

Year Completed

1904

Dam Length

660

Dam Height

28

River Or Stream

White River

Primary Dam Type

Timber Crib

Surface Area

773

Drainage Area

11072

Nid Storage

12500

Structural Height

28

Hazard Potential

Significant

Nid Height

28
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.