James Graham Lake Dam Reservoir Report

Last Updated: December 5, 2025

James Graham Lake Dam in Telfair, Georgia is a privately owned structure with a height of 22 feet and a length of 700 feet.


°F

°F

mph

Wind

%

Humidity

Summary

The dam, built in an unknown year, has a storage capacity of 141 acre-feet and serves a moderate risk level of 3. It is classified as a buttress dam with uncontrolled spillways and outlets.

Despite being not rated in terms of condition assessment, the dam is inspected every 5 years, with the last inspection conducted in May 2017. The hazard potential of the dam is undetermined, and it is not regulated by the state. The dam's purpose and associated structures are not specified, but it is located in Congressional District 08 of Georgia, contributing to water resource management in the area.

Water resource and climate enthusiasts may find James Graham Lake Dam intriguing due to its privately owned status, unique design features, and risk assessment. The dam's location in Telfair, Georgia, and its moderate risk level provide opportunities for further exploration and study in the realm of water resource management and climate change adaptation. Additionally, the dam's storage capacity and inspection frequency offer insights into its role in maintaining water supply and mitigating potential risks in the region.

Dam Length

700

Dam Height

22

Surface Area

10

Nid Storage

141

Outlet Gates

Uncontrolled

Hazard Potential

Undetermined

Foundations

Unlisted/Unknown

Nid Height

22
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.