Stroburg Dam Reservoir Report

Last Updated: December 13, 2025

Stroburg Dam, located in Taylor County, Iowa, was completed in 1965 with a primary purpose of fire protection and as a stock or small fish pond.


°F

°F

mph

Wind

%

Humidity

Summary

Owned privately and regulated by the Iowa Department of Natural Resources, this earth dam stands at a height of 31 feet and spans a length of 418 feet. It has a storage capacity of 44 acre-feet and covers a surface area of 3.7 acres, serving the surrounding area for water resource management and recreational purposes.

With a low hazard potential and a moderate risk assessment rating, Stroburg Dam has not been rated for its current condition. Although last inspected in 1968, this dam has state jurisdiction and is subject to regular state permitting, inspection, and enforcement. The dam is associated with the TR-PLATTE BRANCH river or stream and is located in Sheridan, Missouri, within the Rock Island District of the US Army Corps of Engineers.

As an essential infrastructure for water resource management and environmental conservation in the region, Stroburg Dam plays a crucial role in maintaining water levels and providing a habitat for various aquatic species. Climate enthusiasts and water resource experts can appreciate the significance of this dam in contributing to the overall ecosystem health and resilience in Taylor County, Iowa.

Year Completed

1965

Dam Length

418

Dam Height

31

River Or Stream

TR-PLATTE BRANCH

Primary Dam Type

Earth

Surface Area

3.7

Drainage Area

0.13

Nid Storage

44

Hazard Potential

Low

Foundations

Soil

Nid Height

31
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.