Valley View Heights Dam Reservoir Report

Last Updated: December 6, 2025

Valley View Heights Dam, located in Coralville, Iowa, is a private-owned structure with a primary purpose of recreation.


°F

°F

mph

Wind

%

Humidity

Summary

Completed in 1976, this earth dam stands at a height of 29 feet and spans 475 feet in length, providing a storage capacity of 48 acre-feet. The dam is situated on TR-Clear Creek and is regulated by the Iowa Department of Natural Resources, with state inspection and enforcement protocols in place to ensure its safety and compliance.

Despite its low hazard potential, Valley View Heights Dam is considered to have a moderate risk level, with a risk assessment rating of 3. While its condition is currently not rated, the dam is equipped with an uncontrolled spillway and has a surface area of 2 acres. Although there are no associated structures or outlet gates, the dam serves as an important recreational asset in the area, offering opportunities for water enthusiasts to enjoy its tranquil surroundings and scenic views. With its peaceful setting and strategic location within Johnson County, Valley View Heights Dam continues to be a valuable resource for both locals and visitors alike.

Year Completed

1976

Dam Length

475

Dam Height

29

River Or Stream

TR-CLEAR CREEK

Primary Dam Type

Earth

Surface Area

2

Drainage Area

0.06

Nid Storage

48

Hazard Potential

Low

Foundations

Soil

Nid Height

29
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.