Blockton Watershed Site S-2 Reservoir Report
Last Updated: December 14, 2025
Blockton Watershed Site S-2, located in Taylor County, Iowa, is a low-hazard earth dam completed in 1987 for multiple purposes including fire protection, stock management, and flood risk reduction.
°F
°F
mph
Wind
%
Humidity
Summary
Managed by the local government and designed by USDA NRCS, this dam has a storage capacity of 217 acre-feet and a surface area of 9.4 acres, serving a drainage area of 0.86 square miles.
The dam's primary purpose of fire protection, stock management, and small fish pond maintenance aligns with its low hazard potential and moderate risk assessment rating. With a spillway type of uncontrolled and a structural height of 27 feet, Blockton Watershed Site S-2 plays a crucial role in regulating water flow in the TR-Platte River. Its condition is currently not rated, but it is subject to state regulation, permitting, inspection, and enforcement by the Iowa DNR.
Situated in a picturesque rural setting, this dam provides essential water resource management and climate resilience benefits to the Blockton community. Its strategic location and multi-purpose design make it a key asset for local emergency preparedness and environmental conservation efforts in the region.
Year Completed |
1987 |
Dam Length |
560 |
Dam Height |
27 |
River Or Stream |
TR-PLATTE R. |
Primary Dam Type |
Earth |
Surface Area |
9.4 |
Drainage Area |
0.86 |
Nid Storage |
217 |
Hazard Potential |
Low |
Foundations |
Soil |
Nid Height |
27 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Blockton Watershed Site S-2