205 Reservoir Report

Last Updated: December 6, 2025

Located in Clinton, Kansas, the 205 dam serves as a crucial tool for flood risk reduction in the area.


°F

°F

mph

Wind

%

Humidity

Summary

Constructed in 2005, this earth dam stands at a height of 26.2 feet and has a storage capacity of 186 acre-feet. The dam's primary purpose is flood risk reduction, but it also provides opportunities for recreational activities in the region.

Managed by the local government, the 205 dam is regulated by the Kansas Department of Agriculture and undergoes regular inspections to ensure its structural integrity. With a low hazard potential and a satisfactory condition assessment, the dam poses a moderate risk level. In case of emergencies, the dam has an emergency action plan in place, although details of its last revision and effectiveness remain unclear.

Overall, the 205 dam plays a vital role in protecting the surrounding areas from potential flooding events. With its strategic location on the Wakarusa River-TR, this dam not only safeguards the community but also offers recreational benefits, making it a valuable asset for water resource and climate enthusiasts in Kansas.

Year Completed

2005

Dam Length

900

Dam Height

26.2

River Or Stream

WAKARUSA RIVER-TR

Primary Dam Type

Earth

Surface Area

7.1

Drainage Area

0.43

Nid Storage

186

Outlet Gates

None

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

26
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.