Benjy Kinman Lake Dam Reservoir Report

Last Updated: December 6, 2025

Benjy Kinman Lake Dam, located in Henry County, Kentucky, was completed in 1992 and serves as a recreational resource for water enthusiasts in the area.


°F

°F

mph

Wind

%

Humidity

Summary

The dam, primarily owned and regulated by the state of Kentucky, stands at 26 feet in height and spans 430 feet in length, creating a lake with a storage capacity of 573 acre-feet and a surface area of 49.6 acres. The dam is classified as an Earth dam and has an uncontrolled spillway.

Despite its low hazard potential, Benjy Kinman Lake Dam undergoes regular inspections by the Kentucky Division of Water to ensure its structural integrity. The dam is deemed to have a moderate risk level, reflecting the importance of ongoing risk management measures. While the dam's condition is currently not rated, its emergency action plan and risk assessment are critical components in ensuring the safety of the surrounding community in the event of a potential hazard. Overall, Benjy Kinman Lake Dam stands as a vital recreational and water resource in the region, showcasing the intersection of water management and climate resilience.

Year Completed

1992

Dam Length

430

Dam Height

26

River Or Stream

TRIB-KENTUCKY RIVER

Primary Dam Type

Earth

Surface Area

49.6

Drainage Area

0.08

Nid Storage

573

Hazard Potential

Low

Nid Height

26
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.