San Luis Reservoir (State) Reservoir Report

Last Updated: January 11, 2026

San Luis Reservoir is the largest off-stream reservoir in California, located in Merced County.


°F

°F

mph

Wind

%

Humidity

Summary

It was constructed in 1962 and is managed by the California Department of Water Resources. The reservoir is fed by two rivers, the San Joaquin and Merced Rivers, and is primarily used for agricultural irrigation in the Central Valley. The water supply for the reservoir is reliant on both surface flow and snowpack from the Sierra Nevada Mountains. The reservoir has a capacity of up to 2,041,000 acre-feet of water and covers an area of 12,700 acres. It is a recreational destination for boating, fishing, and camping, and is also used for wildlife habitat conservation. The reservoir is an important source of water for the surrounding communities and farms in the area.

Reservoir Details

24hr Change None%
Percent of Normal None%
Minimum
Maximum
Average
       
Seasonal Comparison
Storage Levels
Pool Elevation Levels
Top Conserv Storage Levels
Inflow Levels

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.