Urieville Dam (Augustine Herman Hwy) Reservoir Report

Last Updated: December 5, 2025

Located in Kent, Maryland, the Urieville Dam (Augustine Herman Hwy) is a state-owned earth dam that was completed in 1955.


°F

°F

mph

Wind

%

Humidity

Summary

With a height of 17 feet and a length of 600 feet, the dam serves primarily for recreation purposes on Morgan Creek-TR. The dam has a storage capacity of 477 acre-feet and a maximum discharge rate of 1750 cubic feet per second.

Despite being classified as low hazard potential, the dam is regularly inspected by Maryland Dam Safety to ensure its fair condition. The spillway is uncontrolled with a width of 138 feet, and the dam's drainage area is 8.5 square miles. The surrounding area offers 35 acres of surface water for recreational activities, attracting water resource and climate enthusiasts to enjoy the natural beauty of Chester Estates.

Overall, the Urieville Dam (Augustine Herman Hwy) provides a serene environment for outdoor enthusiasts to explore and appreciate the importance of water resources in Maryland. With its moderate risk assessment and fair condition, the dam continues to serve as a vital recreational spot for visitors to enjoy the tranquil waters of Morgan Creek-TR.

Year Completed

1955

Dam Length

600

Dam Height

17

River Or Stream

Morgan Creek-TR

Primary Dam Type

Earth

Surface Area

35

Drainage Area

8.5

Nid Storage

477

Outlet Gates

Needle - 0

Hazard Potential

Low

Foundations

Soil

Nid Height

17
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.