Landess 002 Reservoir Report

Last Updated: December 14, 2025

Landess 002, also known as Landess Dam Site 002, is a privately owned earth dam located in Nodaway, Missouri, along the Lincoln Creek.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1981 for grade stabilization purposes, this dam stands at 28 feet high and spans 440 feet in length, with a maximum storage capacity of 88 acre-feet. Despite being categorized as having a low hazard potential, the dam is considered to have a moderate risk due to its location and design.

The dam features an uncontrolled spillway with a width of 32 feet and has a drainage area of 38.4 square miles. With a maximum discharge capacity of 304 cubic feet per second, Landess 002 serves to manage water flow in the area effectively. Although not currently rated for condition assessment, the dam's risk management measures are under scrutiny to ensure its safety and functionality over time.

With a primary purpose of grade stabilization, Landess 002 plays a crucial role in managing water resources in the region. As a part of the Rock Island District, this dam stands as a testament to the importance of infrastructure in mitigating the impacts of climate change and ensuring sustainable water management practices for the future.

Year Completed

1981

Dam Length

440

Dam Height

28

River Or Stream

LINCOLN CREEK

Primary Dam Type

Earth

Surface Area

1

Hydraulic Height

28

Drainage Area

38.4

Nid Storage

88

Structural Height

28

Outlet Gates

None

Hazard Potential

Low

Foundations

Soil

Nid Height

28
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.