Roberts Lake Dam Reservoir Report
Last Updated: January 11, 2026
Roberts Lake Dam, located in Bates County, Missouri, was completed in 1975 and serves multiple purposes including fire protection, stock management, and as a small fish pond.
°F
°F
mph
Wind
%
Humidity
Summary
This private dam, with a height of 25 feet, has a storage capacity of 27 acre-feet and covers a surface area of 2 acres. The dam is primarily made of earth with a buttress core type and an unknown foundation type.
Despite its low hazard potential, Roberts Lake Dam has not been rated for its condition assessment. It is not regulated by the state and does not have a designated state agency for inspection, enforcement, or permitting. The dam is not under the jurisdiction of state authorities and is not part of the US Army Corps of Engineers.
Water resource and climate enthusiasts may find interest in the unique design and purpose of Roberts Lake Dam, and its potential impact on local fire protection efforts, stock management, and recreational activities. The dam's modest size and storage capacity make it a valuable asset for the surrounding community, providing both practical benefits and environmental value for those who enjoy its presence.
Year Completed |
1975 |
Dam Height |
25 |
River Or Stream |
#NAME? |
Primary Dam Type |
Earth |
Surface Area |
2 |
Drainage Area |
55 |
Nid Storage |
27 |
Structural Height |
25 |
Hazard Potential |
Low |
Foundations |
Unlisted/Unknown |
Nid Height |
25 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Roberts Lake Dam