Port Perry Dam Reservoir Report

Last Updated: December 6, 2025

Located in Perry, Missouri, the Port Perry Dam is a state-owned structure that serves the primary purpose of recreation along the TR Nations Creek.


°F

°F

mph

Wind

%

Humidity

Summary

Completed in 1973, this earth dam stands at a height of 70 feet and stretches 900 feet in length, with a storage capacity of 6,506 acre-feet and a surface area of 187 acres. The dam's spillway, with a width of 120 feet, is uncontrolled, allowing for a maximum discharge of 6,992 cubic feet per second.

Managed by the DAM AND RESERVOIR SAFETY PROG in Missouri, the Port Perry Dam is subject to regular inspections and enforcement to ensure its structural integrity and safety. Despite being categorized as having a high hazard potential, the dam's condition assessment in 2009 reported it as satisfactory. However, a moderate risk level of 3 has been assigned to the structure, prompting the implementation of risk management measures to address any potential issues. With its picturesque location and recreational opportunities, the Port Perry Dam is a vital water resource in the region for both residents and visitors alike.

Year Completed

1973

Dam Length

900

Dam Height

70

River Or Stream

TR NATIONS CREEK

Surface Area

187

Drainage Area

1993

Nid Storage

6506

Structural Height

70

Outlet Gates

Valve

Hazard Potential

High

Foundations

Rock

Nid Height

70
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.