Brands Lake Dam Reservoir Report

Last Updated: December 6, 2025

Brands Lake Dam, located in St.


°F

°F

mph

Wind

%

Humidity

Summary

Marys, Missouri, stands as a significant structure along the TR Little Saline Creek. Built in 1970, this private dam primarily serves the purpose of recreation, providing a storage capacity of 70 acre-feet and covering a surface area of 6 acres. With a height of 35 feet and a length of 630 feet, Brands Lake Dam is a vital component of the local landscape, offering residents and visitors alike a picturesque spot for outdoor activities.

Despite its age, Brands Lake Dam remains in satisfactory condition, as per its last assessment in 2007. The dam is subject to regular inspections by the DAM AND RESERVOIR SAFETY PROG regulatory agency in Missouri, ensuring that it meets safety standards and poses no immediate threat to the surrounding community. Although it carries a high hazard potential due to its location, the risk assessment for Brands Lake Dam is considered moderate, highlighting the importance of ongoing monitoring and management measures to prevent any potential emergencies.

With its scenic setting and recreational opportunities, Brands Lake Dam serves as a vital infrastructure for the local community while also presenting challenges in terms of risk management and safety. As water resource and climate enthusiasts, staying informed about the condition and regulatory oversight of dams like Brands Lake is crucial for ensuring the sustainable use of water resources and the protection of communities downstream.

Year Completed

1970

Dam Length

630

Dam Height

35

River Or Stream

TR LITTLE SALINE CREEK

Surface Area

6

Drainage Area

44

Nid Storage

70

Structural Height

35

Outlet Gates

None

Hazard Potential

High

Foundations

Unlisted/Unknown

Nid Height

35
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.