The Place Lake Dam Reservoir Report

Last Updated: December 5, 2025

The Place Lake Dam, located in Potosi, Missouri, was completed in 1965 and stands at a height of 16 feet, with a primary purpose of recreation.


°F

°F

mph

Wind

%

Humidity

Summary

The dam is privately owned and is situated on the TR-Mine A Breton Creek. It has a storage capacity of 94 acre-feet and covers a surface area of 7 acres.

Despite not being regulated by the state, The Place Lake Dam has a high hazard potential and its condition has not been rated. The last inspection of the dam was conducted in August 1980, and there is no designated inspection frequency listed. The dam has not been modified since its completion and does not have an emergency action plan in place.

For water resource and climate enthusiasts, The Place Lake Dam provides an interesting case study of a privately owned recreational dam with high hazard potential. Its location in the scenic Washington County, Missouri, adds to its appeal for outdoor enthusiasts looking to enjoy the surrounding natural beauty while also being aware of the potential risks associated with the dam.

Year Completed

1965

Dam Height

16

River Or Stream

TR-MINE A BRETON CREEK

Primary Dam Type

Earth

Surface Area

7

Drainage Area

490

Nid Storage

94

Structural Height

16

Hazard Potential

High

Foundations

Unlisted/Unknown

Nid Height

16
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.