Ken Buchheit Dam Reservoir Report

Last Updated: December 6, 2025

Ken Buchheit Dam, located in Perry County, Missouri, stands as a testament to effective debris control along the TR-Apple Creek.


°F

°F

mph

Wind

%

Humidity

Summary

Completed in 2002 by the USDA NRCS, this private-owned Earth dam is designed to withstand the forces of nature, with a height of 26 feet and a length of 470 feet. Its primary purpose is to control debris flow, ensuring the safety and functionality of the surrounding area.

With a storage capacity of 82 acre-feet and a drainage area of 220 acres, Ken Buchheit Dam plays a crucial role in managing water resources in the region. Its uncontrolled spillway and low hazard potential indicate a well-maintained structure that poses minimal risk to downstream areas. Although the dam's condition assessment is not rated, its moderate risk level suggests a need for ongoing monitoring and management to ensure its continued effectiveness.

Overall, Ken Buchheit Dam serves as a vital component of water resource management in Perry County, Missouri. With its strategic location, sturdy construction, and focus on debris control, this dam stands as a testament to the importance of resilient infrastructure in mitigating the impacts of climate change and ensuring the safety and security of local communities.

Year Completed

2002

Dam Length

470

Dam Height

26

River Or Stream

TR-APPLE CREEK

Primary Dam Type

Earth

Surface Area

4

Hydraulic Height

25

Drainage Area

220

Nid Storage

82

Structural Height

26

Outlet Gates

Uncontrolled

Hazard Potential

Low

Foundations

Rock

Nid Height

26
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.