Killenbeck Reservoir dam
Killenbeck Reservoir
Killenbeck Reservoir, located in Daniels County, Montana, is a privately owned water resource managed by the USDA NRCS. Built in 1950, this Earth dam stands at 25 feet high and spans 400 feet in length, with a normal storage capacity of 152 acre-feet. The reservoir serves primarily for recreational purposes, attracting enthusiasts to its tranquil waters that offer activities such as fishing and boating.
Situated on TR-BUTTE CREEK, the reservoir's low hazard potential and unassessed condition make it a relatively safe and stable structure. While it is not under federal ownership or funding, the state regulatory agency DNRC oversees its operations, inspections, and enforcement. Despite lacking in-depth assessments and emergency preparedness measures, Killenbeck Reservoir remains a picturesque spot within the Montana landscape, providing a valuable source of water for recreation and wildlife in the region.
For water resource and climate aficionados, Killenbeck Reservoir stands as a serene oasis in the heart of Montana, offering a glimpse into the intricate balance between human intervention and natural conservation. As climate change continues to impact water resources worldwide, the careful management and maintenance of reservoirs like Killenbeck become crucial for ensuring sustainable access to this vital resource for future generations. Its location in the Omaha District and under the jurisdiction of Congressional District 00, Montana, underscores its significance as a local and regional asset in the broader context of water resource management and climate adaptation efforts.
Dam data reference
Condition Assessment
- Satisfactory
- No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
- Fair
- No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
- Poor
- A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
- Unsatisfactory
- A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
- Not Rated
- The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Hazard Potential Classification
- High
- Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
- Significant
- Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
- Low
- Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
- Undetermined
- Dams for which a downstream hazard potential has not been designated or is not provided.
Plan around the weather
Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.
Next 5 days, hour by hour
Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.
5-day forecast table
Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.
| Time | Condition | Temp (°F) | Snow (in) | Rain (in) | Humidity (%) | Wind (mps) | Wind dir |
|---|---|---|---|---|---|---|---|
| Loading detailed forecast… | |||||||
15-day temperature & precipitation
Daily temperatures, snow, and rain projected over the next two weeks.
Nearby streamflow gauges
USGS streamgauges around Killenbeck Reservoir -- inflows here typically show up in storage 24-72 hours later.
| Streamgauge | Discharge | View |
|---|---|---|
| Poplar River At International Boundary | 6 cfs | → |
| Rock Cr Bl Horse Cr Nr Int Bndry | 5 cfs | → |
| Poplar River Near Poplar Mt | 36 cfs | → |
| Missouri River Near Wolf Point Mt | 4,840 cfs | → |
Make a day of it
Boat launches, lakeside camping, fishing access, and other reservoirs near Killenbeck Reservoir.
Track Killenbeck Reservoir in the Snoflo app
Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.
About Killenbeck Reservoir
Where does the data for Killenbeck Reservoir come from?
Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.
How often is the report updated?
NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.
What does the Low hazard rating mean?
The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.
What's "% of normal"?
The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).
Can I get alerts when storage crosses a threshold?
Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.
Other water bodies near here
Snoflo-tracked reservoirs and dams within driving distance of Killenbeck Reservoir.