French #10 Reservoir Report

Last Updated: December 6, 2025

French #10 is a privately owned dam located in Kinsey, Montana, along the TR-South Sunday Creek.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1955, this earth dam stands at a height of 26 feet and has a storage capacity of 94 acre-feet, primarily used for fire protection, stock, or as a small fish pond. The dam has a low hazard potential and is currently not rated for its condition.

Owned and regulated by the Montana Department of Natural Resources and Conservation (DNRC), French #10 serves as a crucial water resource for the local community. With a normal storage capacity of 46 acre-feet, the dam plays a vital role in ensuring water availability for various purposes. Despite being state regulated and inspected, the dam's condition assessment remains unrated, highlighting the need for continued monitoring and maintenance to uphold its integrity and safety.

As an important structure in the area, French #10 contributes to water management and conservation efforts in Custer County, Montana. With its strategic location and purposeful design, the dam serves as a reliable source of water for firefighting, livestock, and recreational activities. Climate and water resource enthusiasts can appreciate the significance of this dam in sustaining the local ecosystem and supporting community needs.

Year Completed

1955

Dam Length

310

Dam Height

26

River Or Stream

TR-SOUTH SUNDAY CREEK

Primary Dam Type

Earth

Hydraulic Height

26

Nid Storage

94

Hazard Potential

Low

Nid Height

26
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.