Summary
Built in 1962, this dam stands at a height of 25 feet and has a length of 400 feet, providing a storage capacity of 58 acre-feet. Situated on TR-LARB Creek in Valley County, Romo is regulated by the Montana Department of Natural Resources and Conservation (DNRC) and is subject to state inspection and enforcement.
Despite its low hazard potential, Romo has not been rated for its condition assessment, and details about emergency action plans, inundation maps, and risk assessment are not available. The dam is not owned or funded by any federal agency and does not fall under the purview of the U.S. Army Corps of Engineers. With its location in a rural setting and its primary purpose of providing essential services like fire protection and livestock water, Romo plays a crucial role in supporting local water resource management and climate resilience efforts in the region.
As a key infrastructure for the community, Romo's operational status, maintenance practices, and emergency preparedness should be closely monitored to ensure its continued functionality and safety. Water resource and climate enthusiasts can appreciate the significance of Romo in meeting the water needs of the area, while also recognizing the importance of ongoing monitoring and risk management to safeguard against potential hazards and ensure the resilience of this vital earth dam.
Year Completed |
1962 |
Dam Length |
400 |
Dam Height |
25 |
River Or Stream |
TR-LARB CREEK |
Primary Dam Type |
Earth |
Hydraulic Height |
25 |
Nid Storage |
58 |
Hazard Potential |
Low |
Nid Height |
25 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Romo