Summary
Completed in 2003, the dam stands at a structural height of 10 feet and has a length of 100 feet, with a maximum storage capacity of 51 acre-feet and a surface area of 9.3 acres. Despite its low hazard potential, the dam has not been rated for its condition as of the last inspection in July 2011.
Situated in a picturesque location with coordinates of 48.17232 latitude and -106.86943 longitude, Paulo Dam serves as a vital water resource in the region. It is interesting to note that the dam is not regulated by the state and does not fall under state jurisdiction, highlighting the unique federal oversight of this infrastructure. Moreover, the dam is not equipped with outlet gates or a spillway, suggesting a simpler design compared to more complex water management systems.
Although the dam's primary purpose is not specified, its association with the Bureau of Land Management underscores its significance for federal water resource management in Montana. With its intriguing design featuring buttress and stone core types, Paulo Dam stands as a remarkable example of sustainable water infrastructure blending harmoniously into the surrounding natural landscape. Enthusiasts of water resources and climate will find Paulo Dam to be a compelling subject for further exploration and study.
Year Completed |
2003 |
Dam Length |
100 |
Primary Dam Type |
Gravity |
Surface Area |
9.3 |
Nid Storage |
51 |
Structural Height |
10 |
Hazard Potential |
Low |
Foundations |
Unlisted/Unknown |
Nid Height |
10 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Paulo Dam