Blackstone Dam Reservoir Report

Last Updated: December 5, 2025

Blackstone Dam, located in Scandia, Kansas, is a privately owned structure with a primary purpose of irrigation.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1953 by the USDA NRCS, this earth dam stands at a height of 16 feet with a structural height of 18 feet and a length of 485 feet. It has a normal storage capacity of 45 acre-feet and a maximum storage of 104 acre-feet, serving the surrounding area with water for agricultural needs.

Managed by the Nebraska Department of Natural Resources, Blackstone Dam is regulated, permitted, inspected, and enforced to ensure its safe operation. With a low hazard potential and fair condition assessment, the dam is deemed to be in good standing for its intended purpose. Despite being a privately owned structure, it plays a crucial role in providing water resources for the local community and supporting irrigation in the region. Enthusiasts of water resources and climate will find Blackstone Dam to be an essential infrastructure contributing to water management in the area.

Year Completed

1953

Dam Length

485

Dam Height

16

River Or Stream

TR-CROSBY CREEK

Primary Dam Type

Earth

Surface Area

10

Hydraulic Height

16

Drainage Area

0.5

Nid Storage

104

Structural Height

18

Hazard Potential

Low

Foundations

Soil

Nid Height

18
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.