Ute Dam Reservoir Report

Last Updated: December 7, 2025

Ute Dam, located in Logan, New Mexico, is a state-regulated earth dam completed in 1963 for the primary purpose of water supply.


°F

°F

mph

Wind

%

Humidity

Summary

The dam, standing at 132 feet high with a hydraulic height of 107 feet, holds a maximum storage capacity of 464,240 acre-feet and serves irrigation, recreation, and water supply purposes. Situated on the Canadian River, the dam boasts a spillway width of 840 feet and a drainage area of 10,550 square miles.

With a hazard potential classified as high but a satisfactory condition assessment, Ute Dam is inspected annually to ensure its structural integrity. The dam's Emergency Action Plan (EAP) was last revised in 2013, indicating preparedness in case of emergencies. Despite moderate risk assessment, the dam's risk management measures and inundation maps are yet to be fully detailed. Ute Dam plays a crucial role in water resource management in the region, highlighting the importance of effective monitoring and maintenance practices to ensure its continued safe operation for both water supply and recreational activities.

Year Completed

1963

Dam Length

6570

Dam Height

132

River Or Stream

CANADIAN RIVER

Primary Dam Type

Earth

Surface Area

7200

Hydraulic Height

107

Drainage Area

10550

Nid Storage

464240

Structural Height

132

Outlet Gates

Valve - 0

Hazard Potential

High

Foundations

Rock

Nid Height

132
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.