Eklund Storage Works Dam Reservoir Report

Last Updated: May 6, 2026

°F

°F

mph

Wind

%

Humidity

Eklund Storage Works Dam, located in Union County, New Mexico, was completed in 1915 with a primary purpose of irrigation.


Summary

This earth dam, standing at a height of 27 feet and a length of 724 feet, harnesses the waters of Apache Creek to provide water for agriculture in the region. The dam has a storage capacity of 32 acre-feet and is regulated by the Office of the State Engineer, with state permitting, inspection, and enforcement in place to ensure its safe operation.

Despite its low hazard potential, the dam's condition assessment in 2013 was rated as poor, indicating a need for maintenance and potential upgrades to ensure its long-term stability. The risk assessment for the dam is moderate, highlighting the importance of ongoing monitoring and management measures to mitigate any potential risks. With its historical significance and vital role in supporting agricultural activities in the area, the Eklund Storage Works Dam serves as a reminder of the importance of sustainable water resource management in the face of changing climate conditions.

15-Day Long Term Forecast


Year Completed

1915

Dam Length

724

Dam Height

27

River Or Stream

APACHE CREEK

Primary Dam Type

Earth

Nid Storage

32

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

27
       
Seasonal Comparison

5-Day Hourly Forecast Detail

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
View more

Nearby Reservoirs