Bull Pond Dam Reservoir Report

Last Updated: December 6, 2025

Bull Pond Dam, located in Orange County, New York, was completed in 1926 and is primarily used for recreation purposes.


°F

°F

mph

Wind

%

Humidity

Summary

The concrete dam stands at a height of 8 feet and has a length of 112 feet, creating a surface area of 26 acres and a storage capacity of 70 acre-feet. The dam is situated on the TR-POPOLOPEN BROOK and is regulated by the New York State Department of Environmental Conservation (NYS DEC).

With a low hazard potential and a moderate risk assessment rating, Bull Pond Dam has not been inspected since July 1973 and is currently listed as "Not Rated" in terms of its condition assessment. The spillway type is uncontrolled with a width of 50 feet, ensuring safe water release during times of excessive flow. While the dam does not have associated structures or outlet gates, it remains a significant feature in the area for recreational activities and as a water resource for the local community.

Despite its age, Bull Pond Dam continues to serve its purpose effectively with proper state regulations and permitting in place. The dam's location within a scenic environment and its historical significance make it a notable landmark for water resource and climate enthusiasts to appreciate and study in the New York region.

Year Completed

1926

Dam Length

112

Dam Height

8

River Or Stream

TR-POPOLOPEN BROOK

Primary Dam Type

Concrete

Surface Area

26

Nid Storage

70

Hazard Potential

Low

Nid Height

8
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.