Lake Hamilton Reservoir Report

Last Updated: December 6, 2025

Lake Hamilton in Wayne, Pennsylvania, is a privately owned water resource managed by the Pennsylvania Department of Environmental Protection.


°F

°F

mph

Wind

%

Humidity

Summary

This recreational lake, completed in 1954, has a dam height of 15 feet and a storage capacity of 354 acre-feet. With a surface area of 30 acres and a drainage area of 3.5 square miles, Lake Hamilton provides opportunities for outdoor activities and water-based recreation.

Despite its recreational appeal, Lake Hamilton poses a high hazard potential with a poor condition assessment. The dam's inspection frequency is set at once a year, indicating the need for regular monitoring and maintenance to ensure public safety. The surrounding Buckingham Township should be aware of the potential risks associated with the dam and have emergency preparedness measures in place.

For water resource and climate enthusiasts, Lake Hamilton presents an opportunity to explore the intersection of recreational enjoyment and environmental stewardship. By understanding the regulatory oversight and maintenance challenges faced by this dam, enthusiasts can advocate for sustainable water management practices and help preserve this valuable natural resource for future generations.

Year Completed

1954

Dam Length

370

Dam Height

15

River Or Stream

FACTORY CREEK

Primary Dam Type

Earth

Surface Area

30

Drainage Area

3.5

Nid Storage

354

Hazard Potential

High

Foundations

Unlisted/Unknown

Nid Height

15
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.