Glenmary Dam dam
Glenmary Dam
Glenmary Dam, also known as Glenmary Lake, is a privately owned structure located in Jefferson County, Kentucky. Built in 1990, this earth dam stands at a height of 25 feet and stretches 550 feet in length. Its primary purpose is for recreation, offering a surface area of 4.21 acres and a storage capacity of 97 acre-feet.
Situated along Floyds Fork, Glenmary Dam is regulated by the Kentucky Division of Water and undergoes regular inspections to ensure its safety and compliance with state regulations. With a low hazard potential and a moderate risk assessment rating, this dam provides a safe and enjoyable recreational space for visitors to enjoy activities such as fishing, boating, and picnicking.
Managed by a private owner, Glenmary Dam's design was overseen by James-Winstead and Associates, a firm based in Louisville, Kentucky. While it has no associated structures or federal agency involvement, this dam serves as a valuable asset for the local community, offering both leisure opportunities and a source of water resource management along the Floyds Fork watershed.
Dam data reference
Condition Assessment
- Satisfactory
- No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
- Fair
- No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
- Poor
- A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
- Unsatisfactory
- A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
- Not Rated
- The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Hazard Potential Classification
- High
- Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
- Significant
- Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
- Low
- Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
- Undetermined
- Dams for which a downstream hazard potential has not been designated or is not provided.
Plan around the weather
Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.
Next 5 days, hour by hour
Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.
5-day forecast table
Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.
| Time | Condition | Temp (°F) | Snow (in) | Rain (in) | Humidity (%) | Wind (mps) | Wind dir |
|---|---|---|---|---|---|---|---|
| Loading detailed forecast… | |||||||
15-day temperature & precipitation
Daily temperatures, snow, and rain projected over the next two weeks.
Nearby streamflow gauges
USGS streamgauges around Glenmary Dam -- inflows here typically show up in storage 24-72 hours later.
| Streamgauge | Discharge | View |
|---|---|---|
| Floyds Fork Near Mt Washington | 1,090 cfs | → |
| Chenoweth Run At Gelhaus Lane Near Fern Creek | 19 cfs | → |
| Cedar Creek At Thixton Road Near Louisville | 40 cfs | → |
| Fern Creek At Old Bardstown Rd At Louisville | 5 cfs | → |
| Pennslyvania Run At Mt Washington Rd Nr Louisville | 10 cfs | → |
| Chenoweth Run At Ruckriegal Parkway | 3 cfs | → |
Make a day of it
Boat launches, lakeside camping, fishing access, and other reservoirs near Glenmary Dam.
Boat launches
- Lasater Road Louisville
- Cooper Chapel Road Louisville
- Bullitt County Boat Ramp
- Long Run Lake Boat Ramp
- Corps Of Engineers Tailwater Road Spencer County
- Harrison Avenue 1021, Clarksville
Campgrounds
- Taylorsville Lake State Park
- Lake Shelby Campground
- Salt River Rec Area
- Salt River Recreation Park
- My Old Kentucky Home State Park
- Charlestown State Park
Track Glenmary Dam in the Snoflo app
Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.
About Glenmary Dam
Where does the data for Glenmary Dam come from?
Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.
How often is the report updated?
NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.
What does the Low hazard rating mean?
The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.
What's "% of normal"?
The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).
Can I get alerts when storage crosses a threshold?
Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.
Other water bodies near here
Snoflo-tracked reservoirs and dams within driving distance of Glenmary Dam.