Robertson Lake Dam dam
Robertson Lake Dam
Robertson Lake Dam, located in Lowndes, Mississippi, is a privately-owned earth dam primarily used for recreation purposes. Completed in 2011, the dam stands at a height of 19.3 feet and has a storage capacity of 204.1 acre-feet. With a surface area of 20.1 acres, the dam is situated on the UNT of Bottom Creek and is regulated by the Mississippi Department of Environmental Quality.
Despite being categorized as a low hazard potential structure, Robertson Lake Dam is subject to moderate risk assessment due to its location and design features. The dam features an uncontrolled spillway type and has a maximum discharge rate of 234.18 cubic feet per second. While the dam's condition is currently not rated, it undergoes regular state inspections and enforcement measures to ensure its safety and compliance with regulations.
For water resource and climate enthusiasts, Robertson Lake Dam presents an intriguing case study in dam management and risk assessment. As a vital structure for recreation in the region, the dam's design, height, and storage capacity play a significant role in understanding water resource management and the potential impacts of climate change on dam infrastructure. With its location on Bottom Creek and the involvement of the Mississippi Department of Environmental Quality, the dam serves as a focal point for exploring the intersection of water resources, regulatory oversight, and emergency preparedness in the face of evolving environmental challenges.
Dam data reference
Condition Assessment
- Satisfactory
- No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
- Fair
- No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
- Poor
- A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
- Unsatisfactory
- A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
- Not Rated
- The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Hazard Potential Classification
- High
- Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
- Significant
- Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
- Low
- Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
- Undetermined
- Dams for which a downstream hazard potential has not been designated or is not provided.
Plan around the weather
Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.
Next 5 days, hour by hour
Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.
5-day forecast table
Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.
| Time | Condition | Temp (°F) | Snow (in) | Rain (in) | Humidity (%) | Wind (mps) | Wind dir |
|---|---|---|---|---|---|---|---|
| Loading detailed forecast… | |||||||
15-day temperature & precipitation
Daily temperatures, snow, and rain projected over the next two weeks.
Nearby streamflow gauges
USGS streamgauges around Robertson Lake Dam -- inflows here typically show up in storage 24-72 hours later.
| Streamgauge | Discharge | View |
|---|---|---|
| Catalpa Creek At Mayhew | 2,940 cfs | → |
| Tombigbee River At Stennis Lock And Dam | 2,630 cfs | → |
| Noxubee River At Macon | 95 cfs | → |
| Luxapallila Creek Nr Columbus | 188 cfs | → |
| Tombigbee River At Bevill L&D Nr Pickensville | 3,900 cfs | → |
| Tombigbee River At Aberdeen Lock And Dam | 3,060 cfs | → |
Make a day of it
Boat launches, lakeside camping, fishing access, and other reservoirs near Robertson Lake Dam.
Track Robertson Lake Dam in the Snoflo app
Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.
About Robertson Lake Dam
Where does the data for Robertson Lake Dam come from?
Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.
How often is the report updated?
NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.
What does the Low hazard rating mean?
The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.
What's "% of normal"?
The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).
Can I get alerts when storage crosses a threshold?
Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.
Other water bodies near here
Snoflo-tracked reservoirs and dams within driving distance of Robertson Lake Dam.