Dam Report

Brown-Mullin Ws Scs Site 5a Dam dam

Texas, USA Browns Creek Hazard Not Available
Today high
--
Tonight low
--
Dam height
46ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Brown-Mullin Ws Scs Site 5a Dam -- None dam
Brown-Mullin Ws Scs Site 5a Dam None · Browns Creek
About this dam

Brown-Mullin Ws Scs Site 5a Dam

Brown-Mullin WS SCS Site 5a Dam, located in Mills County, Texas, was completed in 1973 with a primary purpose of flood risk reduction along Browns Creek. This earth dam, designed by USDA NRCS, stands at a height of 46 feet and has a length of 2830 feet, providing storage capacity of 1633 acre-feet and a drainage area of 4.98 square miles. The dam features an uncontrolled spillway with a width of 400 feet and outlet gates including a slide and two uncontrolled gates.

The dam, regulated by the Texas Commission on Environmental Quality (TCEQ), has not been rated for condition assessment but is considered to have moderate risk potential. With no associated structures, the dam is inspected by the state with permitting, inspection, and enforcement responsibilities falling under state jurisdiction. In case of emergencies, contact information and risk management measures are not readily available, indicating a need for further preparedness and documentation. Overall, Brown-Mullin WS SCS Site 5a Dam serves as a crucial infrastructure for flood risk reduction in the region, protecting surrounding areas from potential inundation events.

StateNone
River / streamBrowns Creek
NID IDTX03307
Owner typeLocal Government
Primary purposeFlood Risk Reduction
Dam typeEarth
Year built1973
Dam height46 ft
Dam length2,830 ft
Max storage1,633 AF
Normal storage159 AF
Surface area22.0 ac
Drainage area5.0 sq mi
Hazard potentialNot Available
ConditionNot Rated
Last inspectionThu, 03 Apr 2003 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Brown-Mullin Ws Scs Site 5a Dam -- inflows here typically show up in storage 24-72 hours later.

Track Brown-Mullin Ws Scs Site 5a Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Brown-Mullin Ws Scs Site 5a Dam

Where does the data for Brown-Mullin Ws Scs Site 5a Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.