Dam Report

Blanket Creek Ws Scs Site 17a 1 Dam dam

Texas, USA Pompey Creek Hazard Not Available
Today high
--
Tonight low
--
Dam height
51ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Blanket Creek Ws Scs Site 17a 1 Dam -- None dam
Blanket Creek Ws Scs Site 17a 1 Dam None · Pompey Creek
About this dam

Blanket Creek Ws Scs Site 17a 1 Dam

Blanket Creek WS SCS Site 17a 1 Dam, located in Mills County, Texas, is a vital water resource structure primarily used for irrigation purposes. Built in 1969 by the USDA NRCS, this earth dam stands at a height of 51 feet and has a hydraulic height of 49 feet, with a length of 2900 feet. The dam has a storage capacity of 5129 acre-feet, serving a drainage area of 16.25 square miles along Pompey Creek.

Despite being in fair condition as of the last assessment in 2014, the dam poses a moderate risk level, highlighting the importance of regular inspections and maintenance. With a spillway width of 312 feet and a maximum discharge rate of 13837 cubic feet per second, the dam plays a crucial role in managing water flow and ensuring irrigation needs are met. The structure is regulated by the Texas Commission on Environmental Quality (TCEQ) and undergoes regular inspections to ensure its structural integrity.

Overall, Blanket Creek WS SCS Site 17a 1 Dam remains a key component of the water infrastructure in Mills County, Texas, safeguarding against potential hazards and supporting the local agricultural community. As a significant piece of the water resource network, this dam illustrates the intersection of water management, climate resilience, and agricultural sustainability in the region.

StateNone
River / streamPompey Creek
NID IDTX03310
Owner typeLocal Government
Primary purposeIrrigation
Dam typeEarth
Year built1969
Dam height51 ft
Dam length2,900 ft
Max storage5,129 AF
Normal storage336 AF
Surface area53.0 ac
Drainage area16.3 sq mi
Hazard potentialNot Available
ConditionFair
Last inspectionTue, 07 Jul 2015 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Blanket Creek Ws Scs Site 17a 1 Dam -- inflows here typically show up in storage 24-72 hours later.

Track Blanket Creek Ws Scs Site 17a 1 Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Blanket Creek Ws Scs Site 17a 1 Dam

Where does the data for Blanket Creek Ws Scs Site 17a 1 Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.