Dam Report

Roberson Lake Dam dam

Texas, USA Tr-Holt Creek Hazard Not Available
Today high
--
Tonight low
--
Dam height
14ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Roberson Lake Dam -- None dam
Roberson Lake Dam None · Tr-Holt Creek
About this dam

Roberson Lake Dam

Roberson Lake Dam, located in Lamar County, Texas, was completed in 1976 by the USDA NRCS with a primary purpose of irrigation. This earth dam, standing at a height of 14 feet and a length of 623 feet, is associated with the TR-Holt Creek and has a storage capacity of 100 acre-feet. Despite being privately owned, the dam is state-regulated with permitting and inspection requirements in place.

With a high risk assessment rating of 2, the dam's hazard potential and condition assessment are currently not available. The absence of a spillway and limited information on drainage area and surface area raise concerns about its ability to safely manage water flow during extreme weather events. However, the dam's strategic location and purpose for irrigation highlight its importance in water resource management and agriculture in the region.

As water resource and climate enthusiasts delve into the details of Roberson Lake Dam, they are met with a blend of curiosity and concern about its structural integrity and risk management measures. The involvement of the Natural Resources Conservation Service in its design adds a layer of expertise and reassurance, but the lack of recent inspection data and emergency preparedness plans leaves room for further investigation and potential improvements to ensure the dam's long-term resilience in the face of changing climate patterns and hydrological challenges.

StateNone
River / streamTr-Holt Creek
NID IDTX05637
Owner typePrivate
Primary purposeIrrigation
Dam typeEarth
Year built1976
Dam height14 ft
Dam length623 ft
Max storage100 AF
Normal storage54 AF
Hazard potentialNot Available
ConditionNot Rated

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Roberson Lake Dam -- inflows here typically show up in storage 24-72 hours later.

Track Roberson Lake Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Roberson Lake Dam

Where does the data for Roberson Lake Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.