Dam Report

Bitner Lake Dam dam

Texas, USA Tr-Little Cypress Bayou Hazard Not Available
Today high
--
Tonight low
--
Dam height
14ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Bitner Lake Dam -- None dam
Bitner Lake Dam None · Tr-Little Cypress Bayou
About this dam

Bitner Lake Dam

Bitner Lake Dam, located in Harrison, Texas, was completed in 1960 and has a primary purpose of recreation. The dam, standing at a height of 14 feet and a length of 360 feet, is classified as an Earth dam with a Buttress core type. It has a storage capacity of 50 acre-feet, with a normal storage level of 10 acre-feet. Despite its recreational focus, the dam does not have a spillway and is not regulated by the state.

With a hazard potential labeled as "Not Available" and a risk assessment rating of "High (2)", Bitner Lake Dam may present some risks for the surrounding area in case of failure. However, the dam's condition has not been rated, and there is no information available on emergency action plans or risk management measures in place. The last inspection of the dam was conducted in May 1989, raising concerns about the need for updated assessments and maintenance to ensure the safety and integrity of the structure for both recreation and potential water resource management in the region.

As a private-owned dam situated on the TR-Little Cypress Bayou, Bitner Lake Dam provides opportunities for recreational activities in the area. However, with limited information available on its current condition and risk management strategies, there is a call for increased attention and oversight to address any potential safety concerns and ensure the sustainable use of this water resource for both recreational and environmental purposes in the future.

StateNone
River / streamTr-Little Cypress Bayou
NID IDTX09015
Owner typePrivate
Primary purposeRecreation
Dam typeEarth
Year built1960
Dam height14 ft
Dam length360 ft
Max storage50 AF
Normal storage10 AF
Hazard potentialNot Available
ConditionNot Rated
Last inspectionWed, 24 May 1989 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Bitner Lake Dam -- inflows here typically show up in storage 24-72 hours later.

Track Bitner Lake Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Bitner Lake Dam

Where does the data for Bitner Lake Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.