Bar Chase Lake Dam Reservoir Report

Last Updated: December 5, 2025

Bar Chase Lake Dam, located in Gregg County, Texas, is a private-owned structure designed by Hart Engineering and Johnson & Pace.


°F

°F

mph

Wind

%

Humidity

Summary

Serving primarily for recreation purposes, this earth dam stands at a height of 26 feet and stretches 600 feet in length, with a maximum storage capacity of 465 acre-feet. The dam overlooks Panther Creek and has a spillway width of 54 feet, with uncontrolled and valve outlets for water discharge. In 2009, the dam underwent hydraulic modifications to enhance its functionality and safety.

Despite being unregulated by the state, Bar Chase Lake Dam has been inspected and maintained, with the last inspection conducted in September 2010. The dam poses a moderate risk, with a hazard potential that is not available and a condition assessment that is not rated. While emergency action plans and risk management measures are not specified, the dam's overall risk level is deemed manageable. Water and climate enthusiasts can appreciate the engineering feat of this dam and its contribution to the local ecosystem and recreational activities in the area.

Years Modified

2009 - Hydraulic

Dam Length

600

Dam Height

26

River Or Stream

PANTHER CREEK

Primary Dam Type

Earth

Surface Area

48

Hydraulic Height

21

Drainage Area

1.5

Nid Storage

465

Structural Height

26

Outlet Gates

Uncontrolled - 4, Valve - 2

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

26
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.