Dam Report

Salt Lake County Chandler Drive (#13) dam

Utah, USA Perry`S Hollow Hazard High
Today high
--
Tonight low
--
Dam height
128ft
Hazard rating
High
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Salt Lake County Chandler Drive (#13) -- None dam
Salt Lake County Chandler Drive (#13) None · Perry`S Hollow
About this dam

Salt Lake County Chandler Drive (#13)

Salt Lake County Chandler Drive (#13) is a vital flood risk reduction structure located in Salt Lake City, Utah. Constructed in 1977, this earth dam stands at a hydraulic height of 115 feet and a structural height of 128 feet, providing essential protection against potential flooding events along Perry's Hollow. With a storage capacity of 52 acre-feet, it serves as a crucial line of defense in safeguarding the surrounding area from the impacts of high water levels.

Managed by the Utah Division of Water Rights, the dam is subject to regular inspections and enforcement measures to ensure its continued functionality and structural integrity. Despite being categorized as having a high hazard potential, the dam is currently assessed to be in fair condition. The last inspection in October 2020 confirmed its operational readiness, reflecting the commitment to maintaining a safe environment for residents and property within the vicinity.

As a key component in the flood risk management infrastructure of Salt Lake County, Chandler Drive (#13) plays a significant role in protecting the community from potential water-related hazards. Its strategic location and design underscore the importance of proactive measures in mitigating the impact of climate change on water resources and infrastructure.

StateNone
River / streamPerry`S Hollow
NID IDUT00529
Owner typeLocal Government
Primary purposeFlood Risk Reduction
Dam typeEarth
Year built1977
Dam length375 ft
Max storage52 AF
Normal storage50 AF
Drainage area0.6 sq mi
Hazard potentialHigh
ConditionFair
Last inspectionThu, 15 Oct 2020 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Salt Lake County Chandler Drive (#13) -- inflows here typically show up in storage 24-72 hours later.

Track Salt Lake County Chandler Drive (#13) in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Salt Lake County Chandler Drive (#13)

Where does the data for Salt Lake County Chandler Drive (#13) come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the High hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

Premium feature

Favorites and alerts are part of Snoflo Premium. Save reservoirs, set storage thresholds, and get push notifications when conditions cross.

Upgrade to Premium Not now
🔔

Manage alerts in the Snoflo app

Custom alerts are configured in the iOS app -- favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

Open App Store