Haywood Lake Dam Reservoir Report

Last Updated: December 5, 2025

Haywood Lake Dam, located in Richmond, North Carolina, was completed in 1945 and serves as a recreational spot along Mountain Creek.


°F

°F

mph

Wind

%

Humidity

Summary

This private dam boasts a hydraulic height of 10 feet and a structural height of 12 feet, with a length of 337 feet. The dam has a storage capacity of 50 acre-feet, providing opportunities for water-based activities in its 7-acre surface area.

Despite being categorized as having a low hazard potential and not yet rated for condition assessment, Haywood Lake Dam undergoes regular inspections to ensure its safety and functionality. The last inspection took place in April 2007, with no reported issues. With its primary purpose being recreation, the dam offers a peaceful retreat for visitors to enjoy the scenic surroundings and engage in outdoor activities.

Although not regulated by the state, Haywood Lake Dam serves as an important resource for water enthusiasts and climate advocates alike. Its serene location in Cheraw Sc, combined with its historical significance and recreational value, make it a must-visit destination for those seeking to appreciate the beauty and importance of water resources in North Carolina.

Year Completed

1945

Dam Length

337

River Or Stream

Mountain Creek

Primary Dam Type

Earth

Surface Area

7

Hydraulic Height

10

Nid Storage

50

Structural Height

12

Hazard Potential

Low

Nid Height

12
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.