Hussey Lake Dam Reservoir Report

Last Updated: December 6, 2025

Hussey Lake Dam, located in Robbins, North Carolina, is a private-owned earth dam completed in 1970 primarily for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

With a structural height of 25 feet and a hydraulic height of 23 feet, this dam creates a reservoir with a storage capacity of 55 acre-feet and a surface area of 4 acres. The dam is situated on the Wolf Ck-Os river/stream and is regulated by the NC Dam Safety Program.

Despite being classified as having a low hazard potential and not having a current condition assessment rating, Hussey Lake Dam undergoes regular state inspections every five years to ensure its safety and compliance with regulations. The last inspection took place in December 2009. While the dam does not have a designated Emergency Action Plan (EAP) or inundation maps prepared, it is reassuring that the risk assessment and management measures remain unspecified, indicating a need for further evaluation and planning to address potential emergency situations.

Hussey Lake Dam provides a vital recreational space within the community, offering opportunities for fishing, boating, and wildlife observation. As a key feature in the area, it is essential for stakeholders to prioritize the safety and maintenance of this dam to continue enjoying the benefits it brings while also ensuring the protection of surrounding areas from any potential risks associated with dam failure.

Year Completed

1970

Dam Length

270

River Or Stream

Wolf Ck-Os

Primary Dam Type

Earth

Surface Area

4

Hydraulic Height

23

Nid Storage

55

Structural Height

25

Hazard Potential

Low

Nid Height

25
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.