Williams Lake Dam #7 Reservoir Report

Last Updated: December 6, 2025

Williams Lake Dam #7, located in Robbins, North Carolina, was completed in 1960 and is primarily used for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

This private earth dam stands at a hydraulic height of 13 feet and a structural height of 16 feet, with a length of 528 feet. The dam has a storage capacity of 68 acre-feet and a maximum discharge rate of 66 cubic feet per second. Despite its low hazard potential, the dam is classified as in fair condition as of the last inspection in May 2012.

The dam, situated on Wet Creek-Os, is not regulated by the state and does not require a permit for operation. It falls under the jurisdiction of Moore County and is inspected regularly by the state to ensure its safety. The surrounding area offers a surface area of 15 acres for recreational activities, making it a popular spot for locals and visitors alike. Despite its age, Williams Lake Dam #7 continues to provide a safe and enjoyable environment for water resource and climate enthusiasts to explore and appreciate.

Year Completed

1960

Dam Length

528

River Or Stream

Wet Creek-Os

Primary Dam Type

Earth

Surface Area

15

Hydraulic Height

13

Nid Storage

68

Structural Height

16

Hazard Potential

Low

Nid Height

16
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.