Bryan Millpond Dam Reservoir Report
Last Updated: December 5, 2025
Bryan Millpond Dam, located in Butters, North Carolina, is a private-owned structure built in 1801 for recreational purposes along the Reedy Meadow Creek.
°F
°F
mph
Wind
%
Humidity
Summary
With a height of 9 feet and a hydraulic height of 7 feet, this earth dam has a storage capacity of 605 acre-feet and covers a surface area of 165 acres. The dam boasts a low hazard potential and has been assessed to be in satisfactory condition as of January 2013.
Despite not being state-regulated, Bryan Millpond Dam undergoes regular inspections to ensure its safety and functionality. The dam stands as a testament to early 19th-century engineering and continues to provide recreational opportunities for locals and visitors alike. With its historical significance and scenic surroundings, the dam serves as a reminder of the importance of water resource management and climate resilience in the face of changing environmental conditions.
Year Completed |
1801 |
Dam Length |
1500 |
River Or Stream |
Reedy Meadow Creek |
Primary Dam Type |
Earth |
Surface Area |
165 |
Hydraulic Height |
7 |
Drainage Area |
5408 |
Nid Storage |
605 |
Structural Height |
9 |
Hazard Potential |
Low |
Nid Height |
9 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Big Swamp Nr Tarheel
|
125cfs |
Cape Fear R At Wilm O Huske Lock Nr Tarheel
|
1860cfs |
Lumber River At Lumberton
|
514cfs |
Lumber River At Boardman
|
814cfs |
Black River Near Tomahawk
|
668cfs |
Lumber River Near Maxton
|
372cfs |
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Bryan Millpond Dam