Glossen Lake Dam #3 Reservoir Report

Last Updated: December 5, 2025

Glossen Lake Dam #3, located in Linwood, North Carolina, is a private dam primarily used for recreation purposes.


°F

°F

mph

Wind

%

Humidity

Summary

With a hydraulic height of 25 feet and a structural height of 30 feet, this earthen dam spans 350 feet in length and has a maximum storage capacity of 54 acre-feet. The dam is situated along the North Potts Creek-Tr river and covers a surface area of 4.5 acres within a drainage area of 26 square miles.

Although not regulated by the state, Glossen Lake Dam #3 is regularly inspected to ensure its safety and has been rated as having a low hazard potential. The last inspection took place in November 2019, with the dam's condition deemed not rated at that time. Despite its private ownership, the dam serves as a recreational spot for water resource and climate enthusiasts to enjoy the surrounding natural beauty and wildlife. With its tranquil waters and picturesque setting, Glossen Lake Dam #3 offers a peaceful escape for visitors looking to connect with nature.

Dam Length

350

River Or Stream

North Potts Creek-Tr

Primary Dam Type

Earth

Surface Area

4.5

Hydraulic Height

25

Drainage Area

26

Nid Storage

54

Structural Height

30

Hazard Potential

Low

Nid Height

30
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.