Dr. Bill Walker Dam Reservoir Report

Last Updated: December 14, 2025

Dr.


°F

°F

mph

Wind

%

Humidity

Summary

Bill Walker Dam, located in Milton, North Carolina, is a private-owned earth dam that was completed in 1984 for the primary purpose of recreation along Hogan's Creek. With a hydraulic height of 23 feet and a structural height of 26.8 feet, this dam has a normal storage capacity of 18 acre-feet and a maximum storage of 21 acre-feet. The dam spans 165 feet in length and covers a surface area of 2 acres, serving as a popular spot for outdoor enthusiasts in Rockingham County.

Despite being privately owned, the Dr. Bill Walker Dam is subject to state inspection, with the last assessment conducted in December 2014 indicating a satisfactory condition and low hazard potential. The dam has not undergone any modifications since its completion and does not fall under the jurisdiction of federal agencies. While it does not have a designated emergency action plan or inundation maps prepared, the dam continues to provide recreational opportunities for the local community while maintaining a safe and functional state. For water resource and climate enthusiasts, this dam serves as a notable landmark in North Carolina's water infrastructure landscape.

Year Completed

1984

Dam Length

165

River Or Stream

Hogan'S Creek-Tr

Primary Dam Type

Earth

Surface Area

2

Hydraulic Height

23

Drainage Area

45

Nid Storage

21

Structural Height

26.8

Hazard Potential

Low

Nid Height

27
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.