Crystal Lake Dam Reservoir Report

Last Updated: December 5, 2025

Crystal Lake Dam, located in Mooresville, North Carolina, is a private earth dam primarily used for recreation on the West Branch Rocky River.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1991, this 26-foot high dam boasts a storage capacity of 21 acre-feet and covers a surface area of 2 acres. Despite being privately owned, the dam is subject to state inspections to ensure its safety and compliance with regulations.

With a low hazard potential and a condition assessment that is currently not rated, Crystal Lake Dam serves as a vital recreational resource in the area. The dam, managed by private owners, does not fall under state jurisdiction or regulation, but it is regularly inspected to maintain its integrity and safety. As a popular spot for outdoor enthusiasts and climate enthusiasts alike, the dam offers a serene location for fishing, boating, and other water-related activities.

Although the dam has not been modified in recent years and lacks detailed information on its spillway type and discharge capacity, it continues to be a beloved destination for locals and visitors. With its picturesque setting and tranquil waters, Crystal Lake Dam remains a valuable asset for the community and a testament to the importance of sustainable water resource management in the face of climate change.

Year Completed

1991

River Or Stream

West Branch Rocky River-Tr

Primary Dam Type

Earth

Surface Area

2

Nid Storage

21

Structural Height

26

Hazard Potential

Low

Nid Height

26
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.