Norwood Dam Reservoir Report

Last Updated: December 5, 2025

Norwood Dam, located in Mineral Spring Drive, North Carolina, is a privately owned structure primarily used for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

This earth dam stands at a structural height of 27 feet with a hydraulic height of 24 feet, providing a storage capacity of 50 acre-feet. The dam spans 350 feet and covers a surface area of 4.6 acres, serving as a significant water resource for the region.

Maintained and regulated by the North Carolina Dam Safety Program, Norwood Dam poses a significant hazard potential but is currently assessed to be in fair condition as of the last inspection in April 2019. With its location along the Holman Creek, the dam plays a crucial role in water management and flood control in the Granville County area. Despite its private ownership, the dam is subject to state jurisdiction, permitting, inspection, and enforcement to ensure the safety and integrity of the structure.

Enthusiasts of water resources and climate in the region can appreciate Norwood Dam's contribution to recreation and water management in North Carolina. As a vital piece of infrastructure, the dam's existence underscores the importance of balancing human activities with environmental stewardship to ensure sustainable water usage and conservation efforts in the area.

Dam Length

350

River Or Stream

Holman Creek-Tr

Primary Dam Type

Earth

Surface Area

4.6

Hydraulic Height

24

Nid Storage

50

Structural Height

27

Hazard Potential

Significant

Nid Height

27
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.