Indian Hills Wda S.1130.4 Reservoir Report

Last Updated: December 14, 2025

Indian Hills Wda S.1130.4, also known as Wildlife S1130.4, is a Federal-owned fish and wildlife pond located in Wells, North Dakota.


°F

°F

mph

Wind

%

Humidity

Summary

Managed by USBOR, this earth dam stands at a height of 7.6 feet and was completed in 1988. With a storage capacity of 149 acre-feet and a surface area of 26.9 acres, the primary purpose of this structure is to support fish and wildlife conservation efforts in the region.

The dam, with a spillway width of 25 feet, has a low hazard potential and is currently rated as "Not Rated" in terms of condition assessment. The outlet gates consist of a single vertical lift, and the structure is regulated and inspected by the North Dakota State Water Commission. The risk assessment for Indian Hills Wda S.1130.4 is moderate, with a DSAC assigned date of unknown. Despite being a relatively small structure, this dam plays a crucial role in supporting the local ecosystem and wildlife population.

While the dam has not been modified in recent years, it continues to serve its purpose effectively. With its close proximity to the James River, Indian Hills Wda S.1130.4 is a vital resource for maintaining the ecological balance in the region. Water resource and climate enthusiasts will appreciate the efforts put into managing and maintaining this important wildlife pond for the benefit of the local flora and fauna.

Year Completed

1988

Dam Height

7.6

River Or Stream

JAMES-TR

Primary Dam Type

Earth

Surface Area

26.9

Nid Storage

149

Structural Height

7.6

Outlet Gates

Vertical Lift - 1

Hazard Potential

Low

Foundations

Soil

Nid Height

8
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.