Prescott Dam #2 Reservoir Report

Last Updated: December 13, 2025

Prescott Dam #2, located in Renville, North Dakota, was completed in 1935 by the Works Progress Administration (WPA) and is primarily used for fire protection, stock, and small fish pond purposes.


°F

°F

mph

Wind

%

Humidity

Summary

The dam is classified as an earth dam with a height of 9 feet and a length of 310 feet, providing a storage capacity of 55 acre-feet. It is situated on Spring Creek and is owned and regulated by the North Dakota State Water Commission (NDSWC).

Despite being classified as a low hazard potential structure with a moderate risk assessment, Prescott Dam #2 has not been inspected since 1963 and is currently in a condition that is not rated. With a spillway width of 40 feet and uncontrolled spillway type, the dam has a surface area of 10 acres and drains a 57-acre watershed. Although it does not have outlet gates or associated locks, the dam serves the local community for various water resource needs and is an integral part of the region's infrastructure for water management and conservation efforts.

Year Completed

1935

Dam Length

310

Dam Height

9

River Or Stream

SPRING CREEK

Primary Dam Type

Earth

Surface Area

10

Drainage Area

57

Nid Storage

55

Outlet Gates

None

Hazard Potential

Low

Foundations

Soil

Nid Height

9
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.