Beckjord Ash Pond C Dam Reservoir Report

Last Updated: December 5, 2025

The Beckjord Ash Pond C Dam, located in New Palestine, Ohio, is a significant structure with a primary purpose of containing tailings.


°F

°F

mph

Wind

%

Humidity

Summary

Owned by a public utility, this earth dam stands at a height of 50 feet and spans a length of 6800 feet. With a storage capacity of 2247 acre-feet and a surface area of 45 acres, this dam plays a crucial role in managing water resources in the area.

Regulated by the Department of Natural Resources, Ohio, the Beckjord Ash Pond C Dam has been deemed to have a significant hazard potential but is currently in satisfactory condition as of the last assessment in May 2018. With inspection and enforcement protocols in place, the dam continues to serve its intended purpose effectively. Climate and water resource enthusiasts can appreciate the importance of this structure in maintaining the ecological balance in the region.

As a vital component of the water management infrastructure in Clermont County, Ohio, the Beckjord Ash Pond C Dam plays a crucial role in flood control and water storage. Its location near the Ohio River underscores its importance in protecting the surrounding areas from potential inundation. Enthusiasts in the field of water resources and climate can find value in studying the design and function of this dam as part of their efforts to understand and address the challenges posed by changing environmental conditions.

Dam Length

6800

Dam Height

50

River Or Stream

OHIO RIVER - OFFSTREAM

Primary Dam Type

Earth

Surface Area

45

Drainage Area

0.16

Nid Storage

2247

Hazard Potential

Significant

Nid Height

50
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.