Scs-Beaver Creek Site-03 Reservoir Report

Last Updated: December 5, 2025

SCS-Beaver Creek Site-03, located in Arapaho, Oklahoma, is a state-regulated dam designed by the USDA NRCS for flood risk reduction along the TR-Beaver Creek.


°F

°F

mph

Wind

%

Humidity

Summary

Completed in 1964, this earth dam stands at a height of 36 feet with a hydraulic height of 33 feet and a length of 3950 feet. The dam has a storage capacity of 325 acre-feet, with a normal water storage level of 101 acre-feet and a surface area of 17 acres.

Despite its low hazard potential, this dam poses a very high risk due to its age and lack of recent inspection data. The spillway is controlled with a width of 1 foot and there is a single valve outlet gate for water release. The dam is owned by the state of Oklahoma and is subject to state regulation, inspection, and enforcement by the OWRB. While the condition of the dam is currently not rated, the risk assessment indicates the urgent need for thorough evaluation and potential risk management measures to ensure the safety and integrity of the structure for flood protection in the region.

Year Completed

1964

Dam Length

3950

Dam Height

36

River Or Stream

TR-BEAVER CREEK

Primary Dam Type

Earth

Surface Area

17

Hydraulic Height

33

Nid Storage

325

Structural Height

36

Outlet Gates

Valve - 1

Hazard Potential

Low

Foundations

Soil

Nid Height

36
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.