Whites Reservoir Report

Last Updated: December 5, 2025

Whites is a privately owned earth dam located in Cotton, Oklahoma, with a primary purpose of recreation.


°F

°F

mph

Wind

%

Humidity

Summary

Completed in 1950, the dam stands at a height of 30 feet and has a normal storage capacity of 104 acre-feet. The dam is regulated by the Oklahoma Water Resources Board and undergoes regular inspections and enforcement measures to ensure its safety and integrity.

The dam is situated on the TR-SANATAG CR river or stream and is under the jurisdiction of the state of Oklahoma. Whites has a controlled spillway with a width of 1 foot and a low hazard potential. Despite being classified as very high risk (1), the dam has not been rated for its condition and does not have an Emergency Action Plan in place. The dam's risk management measures and risk assessment are not specified in the data provided, highlighting a potential area of improvement for the structure.

Overall, Whites dam serves as a recreational resource in the region but poses a potential risk due to its high-risk classification and lack of a current condition assessment. For water resource and climate enthusiasts, monitoring and enhancing the safety and management of Whites dam could be a key focus area to ensure the sustainability of the structure and surrounding environment.

Year Completed

1950

Dam Length

1100

Dam Height

30

River Or Stream

TR-SANATAG CR

Primary Dam Type

Earth

Hydraulic Height

25

Nid Storage

129

Structural Height

30

Outlet Gates

Valve - 1

Hazard Potential

Low

Foundations

Soil

Nid Height

30
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.