Atkins James R Reservoir Report

Last Updated: December 5, 2025

Atkins James R is a privately owned dam located in Oklahoma, specifically in Texas County.


°F

°F

mph

Wind

%

Humidity

Summary

It was completed in 1984 and stands at a height of 45 feet, with a storage capacity of 280 acre-feet. The dam, primarily constructed of earth and stone, serves a variety of purposes and is regulated by the Oklahoma Water Resources Board.

The dam's spillway type is controlled, with a width of 1 foot, and it has a low hazard potential according to assessments. Despite being rated as "Not Rated" for condition assessment, the risk assessment for Atkins James R is very high. The dam has one valve outlet gate and is inspected every 5 years, with the last inspection conducted in December 2010.

Overall, Atkins James R plays a crucial role in managing water resources in the region and protecting against potential flooding. Enthusiasts of water resources and climate will find this dam's design and operational details fascinating, especially in understanding its contribution to the local ecosystem and the safety measures in place to mitigate risks associated with its operation.

Year Completed

1984

Dam Height

45

River Or Stream

TR N CANADIAN RIVER

Primary Dam Type

Earth

Surface Area

17

Hydraulic Height

45

Nid Storage

280

Structural Height

45

Outlet Gates

Valve - 1

Hazard Potential

Low

Foundations

Soil

Nid Height

45
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.