Matt Baker Pond # 1 Reservoir Report

Last Updated: December 6, 2025

Matt Baker Pond # 1, located in Clinton, Oklahoma, is a privately owned water resource regulated by the Oklahoma Water Resources Board.


°F

°F

mph

Wind

%

Humidity

Summary

Designed by USDA NRCS, this pond on Cutberth Creek serves multiple purposes, with a primary purpose listed as "Other." The dam stands at a height of 29.9 feet, with a hydraulic height of 27 feet, and has a storage capacity of 137.6 acre-feet.

With a surface area of 7 acres and a drainage area of 0.89 square miles, Matt Baker Pond # 1 has a controlled spillway type with a width of 2 feet. The hazard potential is rated as low, but the risk assessment is categorized as very high, indicating potential risks that need to be carefully managed. While the condition assessment is listed as "Not Rated," the inspection frequency is set at 5 years.

Overall, Matt Baker Pond # 1 presents an intriguing case study for water resource and climate enthusiasts, showcasing the intersection of private ownership, state regulation, and the importance of risk management in maintaining the sustainability and functionality of water infrastructure in Oklahoma.

Dam Length

448

Dam Height

29.9

River Or Stream

CUTBERTH CREEK

Surface Area

7

Hydraulic Height

27

Drainage Area

0.89

Nid Storage

137.6

Structural Height

29.9

Hazard Potential

Low

Nid Height

30
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
View more

Nearby Reservoirs